Rosetta’s ‘Alice’ instrument – which is the only Rosetta instrument that isn’t an acronym, it is simply a name that the instrument’s principal investigator, Alan Stern, likes – was the first in a line of ultraviolet spectrographs that have also flown on NASA’s Lunar Reconnaissance orbiter, New Horizons and JUNO. It has also been with some Alice team members for their entire lives. With inputs from Alan Stern, Joel Parker, Mike A’Hearn, and John Noonan.

John Noonan is the youngest Alice team member – he was just 10 when Rosetta launched. “Rosetta really got started in the same year I was born, and being able to work on a mission that is the same age as me has been incredibly humbling,” he says. “Working on Rosetta while attending college showed me exactly what I would be getting myself into by continuing to study astrophysics, and has been a driving force in getting me to where I am today.”

Joel Parker, Alice’s deputy principal investigator (PI), adds: “My son was born when I started working on Rosetta and now he is a Junior in college; he grew up with Rosetta all his life.”

To illustrate just how long Rosetta’s mission has been compared with other missions, Mike A’Hearn, a co-investigator on the Alice science team and PI of NASA’s Deep Impact comet mission says: “the concept of our Deep Impact comet mission was first invented after we wrote the proposal for Rosetta-Alice, and yet the Deep Impact prime mission was completed three years before Rosetta even reached its first scientific target, asteroid Steins. This perhaps also highlights the difference between a small PI-led mission with one specific task, and a large mission like Rosetta, with many PI-led instruments with many objectives!”

Rosetta’s Alice was the first of the “Alice” line of ultraviolet spectrographs (UVS). Since then, various Alices have flown to different corners of the Solar System: Pluto (on New Horizons); the Moon (on the Lunar Reconnaissance Orbiter – the UVS is called “LAMP”, the Lyman Alpha Mapping Project); Jupiter (on JUNO, the instrument is simply the UVS), and more are in development for missions to Jupiter (such as ESA’s JUICE mission) and Europa – its legacy will live on.

Rosetta’s Alice certainly set a high standard; some of the team’s top discoveries and accomplishments include:

-the first far-ultraviolet spectra of a comet surface, which found 67P to be very dark, reflecting only a few percent of the ultraviolet light that falls on it, and has a fairly uniform reflectance all over the surface with no large ice patches;

-studying how collisions with electrons can significantly contribute to breaking up molecules in the comet’s coma;

-monitoring the nature of outbursts on the comet, including those electron collisions and suggestion of presence of molecular oxygen;

-studying how some outbursts appear to be gas-dominated and others dust-dominated;

-learning how the Alice detector can be used to measure dust and particle activity around the comet.

Moving instrument parts in space: Alice door flaps
Alice has only a few moving parts. A couple of them can move only once, e.g., the door covering the detector is a spring-loaded door that we opened early in the mission and is stays open forever. But there is only one part that moves more than once, and that is the "aperture door" that is near the front of the instrument. It usually is closed when Alice is not observing. It protects the inside of the instrument (the sensitive optical surfaces and the high voltage detector) from dust and gas from the comet or the spacecraft thrusters, and also from too-bright objects. So, for example, if the spacecraft will be firing thrusters, we close the door and wait 30 minutes for any residual gas to dissipate before opening the door and turning on the high voltage. If GIADA reported a dust environment that got too high, we could close the door, but the dust never got that intense, as far as Alice is concerned.

It is generally a good idea for space instruments to minimize the number of moving parts because those are at the highest risk of failing or breaking, and you can't send up a handy repairman to fix it when it breaks. So we are careful to monitor the number of times we open/close the door and also occasionally test it to see if it seems to be getting “sticky” or misbehaving in some way that might indicate an impending failure. The door on Alice was rated for at least 10,000 “flaps” (open/close cycles), and that number gives a factor of two buffer relative to ground tests. Rosetta’s Alice had about 5,000 flaps through the course of the mission, but the record-holder is the LAMP UVS instrument on LRO, which so far has made over 80,000 door flaps!

If the Rosetta-Alice door did get stuck, there are various options we could have considered. If it got stuck open, we probably would have left it open; it would have increased risk of contamination, but if we continued to try to close it, there would be the risk that if it did close, it then would be stuck closed. If it got stuck closed, we had a small “failsafe” door that is a open-one-time door below the aperture door that would still have allowed about 10% of the light to get through, so we could still keep doing Alice science, through with reduced sensitivity.

Hot and cold

Avoiding "bad dogs"
Joel adds: “Orbital missions keep you busy all the time, trying to simultaneously keep up with planning operations and looking at the stream of resulting data. We always keep in mind that a spacecraft in flight doesn't care when you plan your vacation! And as this was a European mission but I lived in Colorado, if the phone rang at 1:00 at night (9am in Darmstadt), I knew it would be someone from the Mission Operations Centre to report a problem.”

He recalls a few such problems and false alarms: “For example, Alice autonomously shut down when it received data indicating the pressure of the gas around the spacecraft might have increased to levels too high to operate, but as it turned out, the pressure values reported to Alice were incorrect – although in the space business, it is better to be safe than sorry! Another time Alice’s computer mysteriously rebooted – an event that happened only twice during the mission.

“At other times, Alice stopped running exposures because a “too bright object” came into the field of view. The first time that happened, it turned out that it was a bright star and Alice’s internal safety checks correctly “safed” the instrument. As Alice orbited 67P, such bright stars (the Alice team called them “bad dogs”) would frequently cross Alice’s field of view, so to avoid frequent 1:00 am phone calls to the Alice team, operations were modified to account for such situations, and Alice would automatically recover and continue operations once the “bad dog” went away.

“However, once Rosetta is on its crash-course descent to 67P on 30 September, there is no further need to have Alice monitor its safety checks because, after all, Alice will be heading “face first” to collide onto the surface of the comet. Since it is important to gather all the data possible until the very last moment before impact, and it is uncertain what conditions Alice and the other instruments will encounter when Rosetta is closer to the comet than ever before, we will disable all the safety checks for those final hours. We’re looking forward to seeing what we get back!”

The Alice team would also like to pay tribute to Michel Festou and Dave Slater, “two wonderful, bright, and positive team members who contributed mightily to Alice in its early days, but were not here to see it reach its destination. They would certainly have been delighted with Alice’s successes.”

---

REAL LIFE TRUMPS ANIMATION