Blogarchiv
Luftfahrt-History - US Presidential Aircraft History

.

1943:

Boeing-314 Clipper
As airplane travel became popular during the mid-1930s, passengers wanted to fly across the ocean, so Pan American Airlines asked for a long-range, four-engine flying boat. In response, Boeing developed the Model 314, nicknamed the “Clipper” after the great oceangoing sailing ships.
The Clipper used the wings and engine nacelles of the giant Boeing XB-15 bomber on the flying boat’s towering, whale-shaped body. The installation of new Wright 1,500 horsepower Double Cyclone engines eliminated the lack of power that handicapped the XB-15. With a nose similar to that of the modern 747, the Clipper was the “jumbo” airplane of its time.
The Model 314 had a 3,500-mile range and made the first scheduled trans-Atlantic flight June 28, 1939. By the year’s end, Clippers were routinely flying across the Pacific. Clipper passengers looked down at the sea from large windows and enjoyed the comforts of dressing rooms, a dining salon that could be turned into a lounge and a bridal suite. The Clipper’s 74 seats converted into 40 bunks for overnight travelers. Four-star hotels catered gourmet meals served from its galley.
Boeing built 12 Model 314s between 1938 and 1941. At the outbreak of World War II, the Clipper was drafted into service to ferry materials and personnel. Few other aircraft of the day could meet the wartime distance and load requirements. President Franklin D. Roosevelt traveled by Boeing Clipper to meet with Winston Churchill at the Casablanca conference in 1943. On the way home, President Roosevelt celebrated his birthday in the flying boat’s dining room.
.
1942-1945:
Douglas C-54C (DC-4) Skymaster - "Sacred Cow"
In 1938, the Douglas Aircraft Co. decided to produce a four-engine transport about twice the size of the DC-3. It developed the single DC-4E to carry 42 passengers by day or 30 by night. The DC-4E had complete sleeping accommodations, including a private bridal room.
It proved too expensive to maintain, so airlines agreed to suspend development in favor of the less complex DC-4, which was not put into commercial service until 1946. Its military derivative was the C-54 ”Skymaster” transport, ordered by the U.S. Army Air Forces in 1942.
Douglas built 1,241 of the DC-4s and its military counterparts, including the R5D for the Navy. During the war, C-54s flew a million miles a month over the rugged North Atlantic — more than 20 roundtrips a day. A special VC-54C, nicknamed the ”Sacred Cow” by the White House press corps, became the first presidential aircraft, ordered for Franklin D. Roosevelt.
After World War II, commercial airlines placed more than 300 civilian DC-4 transports into service, these DC-4s, along with C-54s converted for civil use, carried more passengers than any other four-engine transport. Some were still flying through 2014.
.
1947-1953
Douglas VC-118 (DC-6) Liftmaster - "The Independence"
The Douglas DC-6 was one of the first airplanes to fly a regularly scheduled around-the-world route. With its higher performance, increased accommodation, greater payload and pressurized cabin, it was a natural evolution of the DC-4.
Although the DC-6 had the same wingspan as the DC-4, its engines helped it fly 90 mph (145 kph) faster than the DC-4, carry 3,000 pounds (1350 kilograms) more payload and fly 850 miles (1368 kilometers) farther. The DC-6 could maintain the cabin pressure of 5,000 feet (1524 kilometers) while flying at 20,000 feet (6096 meters).
American Airlines and United Airlines ordered the commercial DC-6 in 1946, and Pan American Airways used the DC-6 to start tourist-class service across the North Atlantic. The 29th DC-6 was ordered by the U.S, Air Force, adapted as the presidential aircraft and designated the VC-118. It was delivered on July 1, 1947, and named The Independence after President Harry Truman’s hometown, Independence, Mo.
The larger, all-cargo DC-6A first flew Sept. 29, 1949; the larger capacity DC-6B, which could seat up 102 people, first flew Feb. 10, 1951. After the Korean War broke out in 1951, the military ordered DC-6As modified as either C-118A Liftmaster personnel carriers, as the Navy’s R6D transports or as MC-118As for aeromedical evacuation. Between 1947 and 1959, Douglas built a total of 704 DC-6s, 167 of them military versions.
By the end of the twentieth century, DC-6 airplanes were still flying around the world.
.
1959 – 1962
Boeing 707, VC-137A - "Special Air Mission (SAM) 970"
After World War II, the British paved the way for commercial jets with the de Havilland Comet. Tragically, structural problems that led to catastrophic accidents grounded the Comet — and enthusiasm for the commercial jet.
Boeing Company President William Allen and his management are said to have “ bet the company” on a vision that the future of commercial aviation was jets. In 1952, the Boeing board gave the go-ahead to commit 16 million dollars of the company’s own money to building the pioneering 367-80, nicknamed the “Dash 80.” That then-huge amount represented nearly all the profit the company had made since the end of the World War II.
They set out to counter public nervousness. The Boeing strategy was to use the Dash 80 prototype for press and customer flights and an advertising campaign that was directed at the public, stressing the comfort and safety of jet air travel.
The campaign also included a film shown to airline customers titled “Operation Guillotine.” The film of a Boeing test showed a conventional, fully pressurized airplane fuselage being pierced by two metal blades, resulting in a catastrophic failure and disintegration of the structure. Next, the 707 fuselage was put to the same test; this time, five blades pierced the pressurized fuselage, resulting in wisps of air escaping from the punctures — but no cracks and no structural failure.
The Dash 80 prototype led to the commercial 707 and the military KC-135 tanker. Both planes shared the basic design of the Dash 80 but were very different airplanes, neither one being a derivative of the other. One great difference was in the width and length of the fuselage. Airlines wanted the 707 fuselage to be 4 inches (2.5 centimeters) wider than the tanker’s. Its width and the 100-foot length (30.5-meter) made it the largest passenger cabin in the air. Placement of its more than 100 windows allowed airlines to rearrange seats. Location of passenger doors on the left side, at the front and at the rear of the cabin, became standard for subsequent Boeing jets. The exteriors of the 707 and its competitor, the DC-8, were almost identical, but the 707 wing had more sweepback, so it could fly about 20 mph (32 kph) faster.
In just two years, the 707 would help change the way the world traveled. Travel by air eclipsed travel by rail and sea. The dawn of a new era in travel helped to make the terms “Boeing” and “707” fashionable. Requests poured into Boeing for rights to use “707” for naming products. Jantzen swimwear titled its 1957 collection “the 707.”
To take market share away from its strong competitor the Douglas DC-8, Boeing custom-designed 707 variants for different customers. Boeing, for example, made special long-range models for Qantas Airways of Australia and installed larger engines for Braniff’s high-altitude South American routes. Costs of such customizing were high, so with every version of the 707, the financial risk increased. After much effort, sales of the 707 picked up. The risk taking paid off, and the 707 outpaced the DC-8 in sales.
Although the 707s were intended as medium-range transports, they were soon flying across the Atlantic Ocean and across the continent. Boeing delivered 856 Model 707s in all versions between 1957 and 1994; of these, 725, delivered between 1957 and 1978, were for commercial use.
The 707 was designated the 720 when it was modified for short- to medium-range routes and for use on shorter runways. Engineers reduced the fuselage length by 9 feet (2.7 meters), changed the leading edge flaps and later installed turbofan engines. Boeing built 154 720s between 1959 and 1967. Its short- to medium-range role was later filled by 727s and 737s.
.
1962 - 1990
Boeing 707, VC-137C - "Air Force One" SAM 26000 and SAM 27000
After World War II, the British paved the way for commercial jets with the de Havilland Comet. Tragically, structural problems that led to catastrophic accidents grounded the Comet — and enthusiasm for the commercial jet.
Boeing Company President William Allen and his management are said to have “ bet the company” on a vision that the future of commercial aviation was jets. In 1952, the Boeing board gave the go-ahead to commit 16 million dollars of the company’s own money to building the pioneering 367-80, nicknamed the “Dash 80.” That then-huge amount represented nearly all the profit the company had made since the end of the World War II.
They set out to counter public nervousness. The Boeing strategy was to use the Dash 80 prototype for press and customer flights and an advertising campaign that was directed at the public, stressing the comfort and safety of jet air travel.
The campaign also included a film shown to airline customers titled “Operation Guillotine.” The film of a Boeing test showed a conventional, fully pressurized airplane fuselage being pierced by two metal blades, resulting in a catastrophic failure and disintegration of the structure. Next, the 707 fuselage was put to the same test; this time, five blades pierced the pressurized fuselage, resulting in wisps of air escaping from the punctures — but no cracks and no structural failure.
The Dash 80 prototype led to the commercial 707 and the military KC-135 tanker. Both planes shared the basic design of the Dash 80 but were very different airplanes, neither one being a derivative of the other. One great difference was in the width and length of the fuselage. Airlines wanted the 707 fuselage to be 4 inches (2.5 centimeters) wider than the tanker’s. Its width and the 100-foot length (30.5-meter) made it the largest passenger cabin in the air. Placement of its more than 100 windows allowed airlines to rearrange seats. Location of passenger doors on the left side, at the front and at the rear of the cabin, became standard for subsequent Boeing jets. The exteriors of the 707 and its competitor, the DC-8, were almost identical, but the 707 wing had more sweepback, so it could fly about 20 mph (32 kph) faster.
In just two years, the 707 would help change the way the world traveled. Travel by air eclipsed travel by rail and sea. The dawn of a new era in travel helped to make the terms “Boeing” and “707” fashionable. Requests poured into Boeing for rights to use “707” for naming products. Jantzen swimwear titled its 1957 collection “the 707.”
To take market share away from its strong competitor the Douglas DC-8, Boeing custom-designed 707 variants for different customers. Boeing, for example, made special long-range models for Qantas Airways of Australia and installed larger engines for Braniff’s high-altitude South American routes. Costs of such customizing were high, so with every version of the 707, the financial risk increased. After much effort, sales of the 707 picked up. The risk taking paid off, and the 707 outpaced the DC-8 in sales.
Although the 707s were intended as medium-range transports, they were soon flying across the Atlantic Ocean and across the continent. Boeing delivered 856 Model 707s in all versions between 1957 and 1994; of these, 725, delivered between 1957 and 1978, were for commercial use.
The 707 was designated the 720 when it was modified for short- to medium-range routes and for use on shorter runways. Engineers reduced the fuselage length by 9 feet (2.7 meters), changed the leading edge flaps and later installed turbofan engines. Boeing built 154 720s between 1959 and 1967. Its short- to medium-range role was later filled by 727s and 737s.
.
1990- 
Boeing 747, VC-25A - "Flying Oval Office"
The 747 was the result of the work of some 50,000 Boeing people. Called "the Incredibles," these were the construction workers, mechanics, engineers, secretaries and administrators who made aviation history by building the 747 — the largest civilian airplane in the world — in less than 16 months during the late 1960s.
The incentive for creating the giant 747 came from reductions in airfares, a surge in air-passenger traffic and increasingly crowded skies. Following the loss of the competition for a gigantic military transport, the C-5A, Boeing set out to develop a large advanced commercial airplane to take advantage of the high-bypass engine technology developed for the C-5A. The design philosophy behind the 747 was to develop a completely new plane, and other than the engines, the designers purposefully avoided using any hardware developed for the C-5.
The 747's final design was offered in three configurations: all passenger, all cargo and a convertible passenger/freighter model. The freighter and convertible models loaded 8- by 8-foot (2.4- by 2.4-meter) cargo containers through the huge hinged nose.
The 747 was truly monumental in size. The massive airplane required construction of the 200 million-cubic-foot (5.6 million-cubic-meter) 747 assembly plant in Everett, Wash., the world's largest building (by volume). The fuselage of the original 747 was 225 feet (68.5 meters) long; the tail as tall as a six-story building. Pressurized, it carried a ton of air. The cargo hold had room for 3,400 pieces of baggage and could be unloaded in seven minutes. The total wing area was larger than a basketball court. Yet, the entire global navigation system weighed less than a modern laptop computer.
Pilots prepared for the 747 at Boeing training school. The experience of taxiing such a large plane was acquired in a contraption called "Waddell's Wagon," named after Jack Waddell, the company's chief test pilot. The pilot sat in a mockup of the 747 flight deck built atop three-story-high stilts on a moving truck. The pilot learned how to maneuver from such a height by directing the truck driver below him by radio.
The National Aeronautics and Space Administration later modified two 747-100s into Shuttle Carrier Aircraft. The next version, the 747-200, holds approximately 440 passengers and has a range of about 5,600 nautical miles (10,371 kilometers). In 1990, two 747-200Bs were modified to serve as Air Force One and replaced the VC-137s (707s) that served as the presidential airplane for nearly 30 years. The 747-300 has an extended upper deck and carries even more passengers than the -200.
The 747-400 rolled out in 1988. Its wingspan is 212 feet (64 meters), and it has 6-foot-high (1.8-meter-high) "winglets" on the wingtips. The 747-400 also is produced as a freighter, as a combination freighter and passenger model, and as a special domestic version, without the winglets, for shorter range flights.
In August 1999, major assembly began on a militarized 747-400 Freighter to be used as a platform for the U.S. Air Force’s Airborne Laser (ABL) program. It rolled out on Oct. 27, 2006, and was eventually designated YAL-1. Boeing was the prime contractor for ABL, which was designed to provide a speed-of-light capability to destroy all classes of ballistic missiles in their boost phase of flight. Boeing provided the modified aircraft and the battle management system and is the overall systems integrator. ABL partners were Northrop Grumman, which supplied the chemical oxygen iodine, or COIL, high-energy laser associated lasers, and Lockheed Martin, which provided the nose-mounted turret in addition to the beam control/fire control system. On Feb. 11, 2010, the flying test bed destroyed a ballistic missile off the coast of Southern California. The program was canceled in 2011, and in 2012, YAL-1 was flown to the U.S. Air Force “bone yard” near Pima, Ariz., to be scrapped.
Another variant is the Dreamlifter — a specially modified 747-400 — that transports the large composite structures, including huge fuselage sections of the 787 Dreamliner, from partners around the world to Everett, Wash., and Charleston, S. C., for final assembly. The massive cargo is loaded and unloaded from a hinged rear fuselage. The last of the series four was delivered Feb. 16, 2010.
The longer range 747-400 airplanes (also known as 747-400ERs) were launched in late 2000. The 747-400ER (Extended Range) family is available in both passenger and freighter versions. The airplanes are the same size as current 747-400s and have a range of 7,670 nautical miles (14,205 kilometers) as opposed to the 747-400 range of 7,260 nautical miles (13,450 kilometers). It incorporates the strengthened -400 Freighter wing, strengthened body and landing gear, and an auxiliary fuel tank in the forward cargo hold, with an option for a second tank. When the 747-400ER's full-range capability is not needed, operators can remove the tank (or tanks), freeing up additional space for cargo.
In November 2005, Boeing launched the 747-8 family — the 747-8 Intercontinental passenger airplane and the 747-8 Freighter. These airplanes incorporate innovative technologies from the 787 Dreamliner. In fact, the designation 747-8 was chosen to show the technology connection between the 787 Dreamliner and the new 747-8, including the General Electric GEnx-2B engines, raked wingtips and other improvements that allow for a 30 percent smaller noise footprint, 15 percent reduction in-service carbon emissions, better performance retention, lower weight, less fuel consumption, fewer parts and less maintenance.
The 747-8 Freighter first flew on Feb. 8, 2010. The airplane is 250 feet, 2 inches (76.3 meters) long, which is 18 feet, 4 inches (5.6 meters) longer than the 747-400 Freighter. The stretch provides customers with 16 percent more revenue cargo volume compared with its predecessor. That translates to an additional four main-deck pallets and three lower hold pallets.
The passenger version, the Boeing 747-8 Intercontinental, serves the 400- to 500-seat market and took its first flight on March 20, 2011. The cabin’s sculpted ceilings, bigger overhead and side stowbins, a redesigned staircase and dynamic LED lighting all add to an overall more comfortable passenger experience. With 51 additional seats and 26 percent more revenue cargo volume than the 747-400, Boeing delivered the first 747-8 Intercontinental to an undisclosed Boeing Business Jet customer on Feb. 28, 2012. Launch customer Lufthansa took delivery of the first airline Intercontinental April 25, 2012.
On June 28, 2014, Boeing delivered the 1,500th 747 to come off the production line to Frankfurt, Germany-based Lufthansa. The 747 is the first wide-body airplane in history to reach the 1,500 milestone.
Quelle: Boeing
4145 Views
Raumfahrt+Astronomie-Blog von CENAP 0